Welcome, Guest
Username: Password: Remember me

Search Micromat Forum

Keyword

TOPIC: How to update my usb to version 6.04

How to update my usb to version 6.04 27 Feb 2012 05:54 #2027

I have 6.0.3 on my usb how do I update it to 6.0.4?
Rodney
The administrator has disabled public write access.

Re: How to update my usb to version 6.04 27 Feb 2012 06:38 #2028

I cannot try this at the moment, but if you put a copy of TechTool Pro 6.0.3 into your /Applications folder on your usual startup volume, you can use the "Check for Update" feature of the application to update it to version 6.0.4. Then copy the updated version to the USB memory stick, putting it in the same location as 6.0.3, the Protogo Applications folder, replacing 6.0.3.

You should try booting from the USB memory stick and launching the application. It should offer to update the TechTool Protection system preferences pane.
MicroMat Inc
Makers of TechTool
Last Edit: 27 Feb 2012 06:50 by micromattech3.
The administrator has disabled public write access.

Re: How to update my usb to version 6.04 27 Feb 2012 09:49 #2029

Yes that worked thank you
The administrator has disabled public write access.

Re: How to update my usb to version 6.04 27 Feb 2012 10:04 #2030

You are welcome, and thanks for the update.
MicroMat Inc
Makers of TechTool
The administrator has disabled public write access.

Re: How to update my usb to version 6.04 16 Mar 2012 15:57 #2100

In order to update TehcTool Pro 6 v. 6.0.3, you can also do the following:
- insert your USB drive (must be 16GB or more!) into USB spot on your computer/laptop
- open USB drive in Finder
- go to Applications/Utilities/TechTool Pro 6
- run TechTool Pro 6 (you must be connected to Internet)
- from drop-down menu select "Check Updates"
- you will get message that your version 6.0.3 is old and there is a new version 6.0.4
- click "Update"
That is all.
The administrator has disabled public write access.

Re: How to update my usb to version 6.04 16 Mar 2012 18:01 #2102

Thanks for your suggestion.


From our latest newsletter:

TechTool Protogo 3.0.2 now available for download



The Protogo 3.0.2 update is available and now includes TechTool Pro 6.0.4 in the build, plus includes some minor bug fixes. Protogo users can download the new builds directly from their accounts, or if you choose, you can just update the version of TechTool Pro included in Protogo.

To update your version of TechTool Pro 6 in Protogo 3 and Protogo Devices

1-Your TechTool Pro used to create Protogo devices lives in Protogo's folder in Applications, go to: /Applications/ TechTool Protogo/ Protogo Applications/ TechTool Pro 6.app.

2-Launch this copy of TechTool Pro.

3-Under the TechTool Pro 6 menu, select "Check For Update...", then select "Install Update", and the app will be updated to the latest version of TechTool Pro. Now all future Protogo devices will contain the latest version of TechTool Pro.

To update existing devices depends on your profiles. For the Intel and PowerPC profiles, you will need to re-create the device. For Full Copy or Basic profiles, you can boot from the device and update TechTool Pro on the device itself using the updating described above.

Upgrades from TechTool Pro 6 to Protogo are only $39.99.
MicroMat Inc
Makers of TechTool
Last Edit: 16 Mar 2012 18:01 by micromattech3.
The administrator has disabled public write access.

Re: How to update my usb to version 6.04 17 Mar 2012 02:13 #2103

How do I update the installer 3.01 to 3.02? I just got an email saying 3.02 installer was available for download.
The administrator has disabled public write access.

Re: How to update my usb to version 6.04 17 Mar 2012 03:08 #2105

You go to the Login/Register page (see link at top of this page) and look at the section at the bottom, Available Downloads. If you bought TechTool Protogo through our online store, the new installer should be in your available downloads. If it is not, please send a message to This email address is being protected from spambots. You need JavaScript enabled to view it. . Include your TechTool Protogo 3.0.1 serial number in the message. Thank you.
MicroMat Inc
Makers of TechTool
Last Edit: 20 Mar 2012 06:14 by micromattech3.
The administrator has disabled public write access.
The following user(s) said Thank You: nancyb

Re: How to update my usb to version 6.04 17 Mar 2012 18:52 #2107

Thanks-- I did get the files downloaded. I just hadn't let the downloads run long enough. Thanks for your help.
The administrator has disabled public write access.

Re: How to update my usb to version 6.04 17 Mar 2012 20:07 #2108

You are welcome, and thanks for the update.
MicroMat Inc
Makers of TechTool
The administrator has disabled public write access.

Re: How to update my usb to version 6.04 20 Mar 2012 06:54 #2129

The Downloads page now has instructions for getting the TechTool Protogo 3..2 update:

www.micromat.com/downloads/protogo-3-0-2-released
MicroMat Inc
Makers of TechTool
The administrator has disabled public write access.
Time to create page: 0.502 seconds