Welcome, Guest
Username: Password: Remember me

Search Micromat Forum

Keyword

TOPIC: Install TTP 6 on a PPC G3 with MacOS 10.4.11?

Install TTP 6 on a PPC G3 with MacOS 10.4.11? 09 Dec 2013 23:56 #5027

On the TTP 6 DVD there is a MacOS 10.4 install version. Is it possible to install this on a PPC iBook G3 with only 256 MB ram? System is 10.4.11.

Mr Nilsson
The administrator has disabled public write access.

Install TTP 6 on a PPC G3 with MacOS 10.4.11? 10 Dec 2013 02:28 #5030

You cannot install the system software from the bootable DVD to a hard drive volume. The installation will not work, is not licensed to be used in that manner, and it is only a subset of a complete installation of Mac OS X.
MicroMat Inc
Makers of TechTool
The administrator has disabled public write access.

Install TTP 6 on a PPC G3 with MacOS 10.4.11? 10 Dec 2013 11:30 #5031

I am not talking about the Tiger system which already is on the mac. I refer to the 10.4 version of TTP 6 on the DVD, which should be 6.0.4.
Is it possible to install that on a PPC G3, 256 MB ram?
The administrator has disabled public write access.

Install TTP 6 on a PPC G3 with MacOS 10.4.11? 10 Dec 2013 12:30 #5032

Thanks for the clarification.

You cannot use TechTool Pro 6 with 256 MB of RAM or on a Macintosh with a G3 processor. The system requirements are:

G4, G5 Macs, 867 MHz or faster; All Intel-based Macs.
Mac OS X 10.4.9 or greater, including Mac OS X 10.8 'Mountain Lion'.
Mac OS X 10.5 or greater for eDrive creation on active startup volume.
DVD-ROM required to boot from DVD.
512 Megabytes RAM or higher.
MicroMat Inc
Makers of TechTool
Last Edit: 10 Dec 2013 12:30 by micromattech3.
The administrator has disabled public write access.

Install TTP 6 on a PPC G3 with MacOS 10.4.11? 10 Dec 2013 17:30 #5033

Ok.
Which was the last version of TTP compatible with PPC G3 (Mac OS 10.4.11) ?
The administrator has disabled public write access.

Install TTP 6 on a PPC G3 with MacOS 10.4.11? 10 Dec 2013 18:43 #5034

The compatible version will be one of the releases of TechTool Pro 4.x. Please send a message to This email address is being protected from spambots. You need JavaScript enabled to view it. , with all of the relevant specifications, including the 256 MB of RAM. They can provide a means of buying software that is not in the online store. Thank you.
MicroMat Inc
Makers of TechTool
The administrator has disabled public write access.
Time to create page: 0.365 seconds